Toggle_fauxDisk.stl, was printed with NO supports in whatever PLA you have on hand.ĬaseBack_SDcard.stl was printed on its back with supports from the Build Plate Only. Beige PLA.įauxDisk.STL (or fauxDisk_SE.stl if using the SE front) was printed with NO supports. The SE and SE30 fronts have this integrated into the design.ĭriveSupport_back.stl was printed with NO supports in whatever PLA you have on hand.ĬaseBack_fauxDisk.stl was printed on its back with supports from the Build Plate Only. It was printed with NO supports in whatever PLA you have on hand.
Mini vmac ii with rom plus#
If you are making the Mac Plus or the Classic:ĭriveSupport_front.stl. The fronts have extra supports in the design that will need to be removed after printing along with the generated supports. The fronts were printed upright with supports Everywhere. Original Mac, Mac 128 or Mac Plus (the case looked the same)- front_plus.stl.front_supportTest.stl was printed with supports Everywhere. caseBack_supportTest.stl was printed with supports from the Build Plate Only. The toughest areas to support are the handle on the back and the details on the front with the disk opening and the slots for the SE and SE30 versions. There are 2 STLs used strictly to test supports. I arranged the back and front pieces so the support fins are oriented to make easy removal. I made a point to print it on the smooth plate. Sorry about the error.Īll parts were printed with a layer height of 0.20 in PLA. Important: I discovered an issue with misalignment of the screw hole in 2 of the fronts. The new ones will be up there soon as a remix of the original. If you have the old iUniker screen, those files are available on Thingiverse. There are also a couple of files you can use to test your supports without printing the entire part. I've also included the SketchUp file if you'd like to tweak the designs. I will plainly mark them for the Faux Disk and the SD card. Take a look at the instructions before deciding which build.īe aware of which case build you are following. For those of you with larger hands, V2 can be a little tricky to safely squeeze it all inside. The real difference in the build is the lack of space inside the case. The cost difference between the 2 versions is minor. It is inserted and removed similarly to a disk in real Mac Plus. Version 2 moves the SD card to the front of the Tiny Mac. Version 1 has a faux disk in the front of the Tiny Mac and the SD card accessible from the right side.
You can now make a Mac Plus, SE, SE30 or Mac Classic.
Mini vmac ii with rom full#
Here's a full set of both Metric and US wrenches.Īll the STLs should be oriented properly on the build plate.
Mini vmac ii with rom install#
If you need the to install software for the original iUniker screen, jump to Step 16. These instructions and models have been updated to support the Waveshare display. Version 2 has the relocated SD card that is inserted in the front where the original Mac disk is.Ĭheck out the differences in Step 1. Version 1 has a Faux disk and the SD card is accessible from the right side. Note: The STLs are updated for use with an updated screen. All the other parts are readily available. You will need access to a 3d printer for the case. I was able to make a smaller, cheaper and simpler version.
Smaller, cheaper components and new fabrication methods have made the process far easier. Times have changed and technology has moved on. I really wanted one but didn't have the time or resources. Years ago I saw that John Leake, of RetroMacCast, built a 1/3 scale Macintosh.
0 kommentar(er)
